Fume Hood

Fume Hood 'Stainless Steel'

Model :- RSFS-60 Series
  • Our fume hoods are widely used in clinical, diagnostic, dental, and other laboratories, medical organizations, food production and other industries.
  • They find application in studies and works that involve the production and spread of low-toxic vapors and gases harmful to human health.
  • They suck the fumes and throw them outside the working environment to maintain an acceptable air quality, thus aiming at enhancing the safety of personnel as well as the laboratory environment.
  • We offer a wide range of fume hoods in various sizes and dimensions and with variable construction, to meet specific requirements of your research.
    •
    Fume Hood (Stainless Steel) RSFS-60
    Construction Our fume hoods come with a durable, chemically-resistant, double walled construction, made up of 304 grade stainless steel on the outside and 316 grade stainless steel on the inside.
    Door/Sash We offer a Vertical Sliding sash. It is made of polycarbonate / toughened glass. The glass window mechanism can move vertically up and down using sash track. The Sash track system here is made up of concealed counter balanced weights and a pulley, thus allowing the operator to easily move the sash up or down and keep it at a desired height during work.
    Work Surface The easy to clean work surface is made of granite and is fitted with a small wash basin & a good quality tap. A gas cock is also fitted.
    Chemical Storage Cabinet At the bottom of the fume hood we provide a ventilated cabinet to store chemicals.
    Blower High speed centrifugal blower
    Lighting The chamber is fitted with an efficient fluorescent/LED light assembly.
    Exhaust system Comes complete with the motor blower and duct to take out the fumes.
    Electrical Fittings  15/5 Amp socket with switches is provided for light and exhaust system.
    Power Supply Supplied with cord and plug to work at 220 volts 1/3 phase 50Hz A.C.

    Model No. Working Area Size
    RSFS-60-01 90 x 60 x 60 cm
    RSFS-60-02 120 x 60 x 60 cm
    RSFS-60-03 120 x 75 x 75 cm
    RSFS-60-04 150 x 75 x 75 cm

    Fume Hood 'Mild Steel'

    Model :- RSFM-60 Series
  • Our fume hoods are widely used in clinical, diagnostic, dental, and other laboratories, medical organizations, food production and other industries.
  • They find application in studies and works that involve the production and spread of low-toxic vapors and gases harmful to human health.
  • They suck the fumes and throw them outside the working environment to maintain an acceptable air quality, thus aiming at enhancing the safety of personnel as well as the laboratory environment.
  • We offer a wide range of fume hoods in various sizes and dimensions and with variable construction, to meet specific requirements of your research.
    •
    Fume Hood (Mild Steel) RSFM-60
    Construction Our fume hoods come with a durable, chemically-resistant construction, made up of mild steel that is duly powder coated.
    Door/Sash We offer a Vertical Sliding sash. It is made of polycarbonate / toughened glass. The glass window mechanism can move vertically up and down using sash track. The Sash track system here is made up of concealed counter balanced weights and a pulley, thus allowing the operator to easily move the sash up or down and keep it at a desired height during work.
    Work Surface The easy to clean work surface is made of granite and is fitted with a small wash basin & a good quality tap. A gas cock is also fitted.
    Chemical Storage Cabinet At the bottom of the fume hood we provide a ventilated cabinet to store chemicals.
    Blower High speed centrifugal blower
    Lighting The chamber is fitted with an efficient fluorescent/LED light assembly.
    Exhaust system Comes complete with the motor blower and duct to take out the fumes.
    Electrical Fittings  15/5 Amp socket with switches is provided for light and exhaust system.
    Power Supply Supplied with cord and plug to work at 220 volts 1/3 phase 50Hz A.C.

    Model No. Working Area Size
    RSFM-60-05 90 x 60 x 60 cm
    RSFM-60-06 120 x 60 x 60 cm
    RSFM-60-07 120 x 75 x 75 cm
    RSFM-60-08 150 x 75 x 75 cm

    Fume Hood 'Wooden'

    Model :- RSFW-60 Series
  • Our fume hoods are widely used in clinical, diagnostic, dental, and other laboratories, medical organizations, food production and other industries.
  • They find application in studies and works that involve the production and spread of low-toxic vapors and gases harmful to human health.
  • They suck the fumes and throw them outside the working environment to maintain an acceptable air quality, thus aiming at enhancing the safety of personnel as well as the laboratory environment.
  • We offer a wide range of fume hoods in various sizes and dimensions and with variable construction, to meet specific requirements of your research.
    •
    Fume Hood (Wooden) RSFW-60
    Construction Our fume hoods come with a durable construction, made up of ply-board that is covered with melamine lamination from the outside and epoxy painted from the inside.
    Door/Sash We offer a Vertical Sliding sash. It is made of polycarbonate / toughened glass. The glass window mechanism can move vertically up and down using sash track. The Sash track system here is made up of concealed counter balanced weights and a pulley, thus allowing the operator to easily move the sash up or down and keep it at a desired height during work.
    Work Surface The easy to clean work surface is made of granite and is fitted with a small wash basin & a good quality tap. A gas cock is also fitted.
    Chemical Storage Cabinet At the bottom of the fume hood we provide a ventilated cabinet to store chemicals.
    Blower High speed centrifugal blower.
    Lighting The chamber is fitted with an efficient fluorescent/LED light assembly.
    Exhaust system Comes complete with the motor blower and duct to take out the fumes.
    Electrical Fittings  15/5 Amp socket with switches is provided for light and exhaust system.
    Power Supply Supplied with cord and plug to work at 220 volts 1/3 phase 50Hz A.C.

    Model No. Working Area Size
    RSFW-60-09 90 x 60 x 60 cm
    RSFW-60-10 120 x 60 x 60 cm
    RSFW-60-11 120 x 75 x 75 cm

    Demonstration Fume Hood

    Model :- RSFD-60-12 Series
  • Our fume hoods are widely used in clinical, diagnostic, dental, and other laboratories, medical organizations, food production and other industries.
  • They find application in studies and works that involve the production and spread of low-toxic vapors and gases harmful to human health.
  • They suck the fumes and throw them outside the working environment to maintain an acceptable air quality, thus aiming at enhancing the safety of personnel as well as the laboratory environment.
  • We offer a wide range of fume hoods in various sizes and dimensions and with variable construction, to meet specific requirements of your research.
  • Our Demonstration Fume Hood offers a low-cost solution for protection of students, teachers, and the environment during chemistry experiments; from the generated toxic fumes, vapors, particulate matter, and smoke.
  • These hoods are especially designed for close observation of procedures and our ideal for classroom applications.
  • This provides for enhanced visibility for conducting chemistry demonstrations or for observing students performing chemistry experiments.
    •
    Demonstration Fume Hood RSFD-60-12
    Construction Our fume hoods come with a durable construction, made up of mild steel that has a powder coated paint finish. All three sides are fitted with transparent acrylic sheets, offering a clear unobstructed view of the hood interior.
    Door The front door is made of clear acrylic.
    Work Surface The easy to clean work surface is made of granite and is fitted with a small wash basin & a good quality tap. A gas cock is also fitted.
    Chemical Storage Cabinet At the bottom of the fume hood we provide a ventilated cabinet to store chemicals.
    Blower High speed centrifugal blower.
    Lighting The chamber is fitted with an efficient fluorescent/LED light assembly.
    Exhaust system Comes complete with the motor blower and duct to take out the fumes.
    Electrical Fittings  15/5 Amp socket with switches is provided for light and exhaust system.
    Power Supply Supplied with cord and plug to work at 220 volts 1/3 phase 50Hz A.C.
    Working Area Size 90x60x60cm.

    Advanced Fume Hood 'Stainless Steel' With Digital Air Flow Monitor & Exhaust System

    Model :- RSFS-60A Series
  • Our fume hoods are widely used in clinical, diagnostic, dental, and other laboratories, medical organizations, food production and other industries.
  • They find application in studies and works that involve the production and spread of low-toxic vapors and gases harmful to human health.
  • They suck the fumes and throw them outside the working environment to maintain an acceptable air quality, thus aiming at enhancing the safety of personnel as well as the laboratory environment.
  • We offer a wide range of fume hoods in various sizes and dimensions and with variable construction, to meet specific requirements of your research.
  • Our fume hoods are independently certified to the latest safety and performance requirements of the ANSI/ASHRAE Standards.
    •
    Advanced Fume Hood (S.S) With Digital Air Flow Monitor and Exhaust System RSFS-60A
    Construction Our fume hoods come with a durable, chemically-resistant, double-walled construction, made up of 304 grade stainless steel on the outside and 316 grade stainless steel on the inside.
    Design Aerodynamically designed, so as to minimize turbulence and allow for a smooth laminar air flow. This design also improves containment and minimizes static pressure losses and noise levels.
    Air-Flow Type We offer an Automatic By-pass fume hood. This provides for a continuous air flow across the work surface, even when the sash is closed, and creates a relatively constant air volume regardless of the sash position.
    Baffle Arrangement The 2 point suction section along with the baffles help to optimize the fume hood efficiency, by ensuring the smooth and immediate exhaust of fumes.
    Airfoil The powder coated airfoil streamlines airflow into the hood, preventing the creation of turbulent eddies that can carry vapors out of the hood. The space below the airflow allows for the airflow across the work surface when the sash is in a closed position.
    Door/Sash We offer a Vertical Sliding sash. It is made of toughened glass (5mm thick)/polycarbonate, fitted in a powder coated aluminium frame. The glass window mechanism can move vertically up and down using sash track. The Sash track system here is made up of concealed counter balanced weights and a pulley, thus allowing the operator to easily move the sash up or down and keep it at a desired height during work.
    Clear sash open height is 500mm-675mm, according to the size and the fume hood.
    Work Surface The easy to clean, chemically resistant, and splash and spillage proof work surface is made of jet- black granite and is fitted with a small oval shaped 100×200mm PP cup-sink for drainage & a good quality water tap. A gas cock is also fitted.
    Other options for the worktop are also available. These include:
  • Epoxy worktop or
  • Stainless steel (316 grade) worktop.
    • Chemical Storage Cabinet At the bottom of the fume hood we provide a ventilated cabinet to store chemicals.
    Blower High speed centrifugal blower. Our high efficiency, silent, energy-saving blower consists of a continuous rating motor and a chemical-resistant impeller. It is designed to give a face velocity of 80-120 FPM(feet/minute) as per ANSI/AIHA Z9.5, at the safe working height.
    Lighting The chamber is fitted with an efficient fluorescent/LED light assembly, with less power consumption.
    Service Fittings A total of 3 service fittings (1 for water and 2 for gases) are provided for; via remotely operated and color coded service valves with SS (stainless steel) wire braided flexible hose and brass fittings.
    Electrical Fittings  4 electrical 15/5 Ampere electrical sockets with switches (Brand-North West/ Havells) are provided for light and blower. LED indicators show the ‘ON’ position of switches. A control panel is provided with starter for blower.
    Fume Hood Air Suction Capacity 650 CFM confirming to the international face velocity norms and as per the fume hood airflow pattern.
    Alarm Our fume hood is equipped with a highly reliable audio / visual alarm device that indicates the approximate face velocity of airflow; with the primary purpose of detecting a drop or rise in airflow (no static pressure) throughout the hood unit. If the fume hood’s exhaust volume falls below a preset exhaust level, the alarm will alert the operator by sound and visual sign.
    Power Supply Supplied with cord and plug to work at 220 volts 1/3 phase 50Hz A.C.

    Model No. Working Area Size
    RSFS-60A-13 90 x 60 x 60 cm
    RSFS-60A-14 120 x 60 x 60 cm
    RSFS-60A-15 120 x 75 x 75 cm
    RSFS-60A-16 150 x 75 x 75 cm

    Advanced Fume Hood 'Mild Steel' With Digital Air Flow Monitor & Exhaust System

    Model :- RSFM-60A Series
  • Our fume hoods are widely used in clinical, diagnostic, dental, and other laboratories, medical organizations, food production and other industries.
  • They find application in studies and works that involve the production and spread of low-toxic vapors and gases harmful to human health.
  • They suck the fumes and throw them outside the working environment to maintain an acceptable air quality, thus aiming at enhancing the safety of personnel as well as the laboratory environment.
  • We offer a wide range of fume hoods in various sizes and dimensions and with variable construction, to meet specific requirements of your research.
  • Our fume hoods are independently certified to the latest safety and performance requirements of the ANSI/ASHRAE Standards.
    •
    Advanced Fume Hood (S.S) With Digital Air Flow Monitor and Exhaust System RSFS-60A
    Construction Our fume hoods come with a durable, chemically-resistant, double-walled construction, made up of epoxy powder coated, 18 and 22 gauge galvanized steel structure.
    Design Aerodynamically designed, so as to minimize turbulence and allow for a smooth laminar air flow. This design also improves containment and minimizes static pressure losses and noise levels.
    Air-Flow Type We offer an Automatic By-pass fume hood. This provides for a continuous air flow across the work surface, even when the sash is closed, and creates a relatively constant air volume regardless of the sash position.
    Baffle Arrangement The 2 point suction section along with the baffles help to optimize the fume hood efficiency, by ensuring the smooth and immediate exhaust of fumes.
    Airfoil The powder coated airfoil streamlines airflow into the hood, preventing the creation of turbulent eddies that can carry vapors out of the hood. The space below the airflow allows for the airflow across the work surface when the sash is in a closed position.
    Door/Sash We offer a Vertical Sliding sash. It is made of toughened glass (5mm thick)/polycarbonate, fitted in a powder coated aluminium frame. The glass window mechanism can move vertically up and down using sash track. The Sash track system here is made up of concealed counter balanced weights and a pulley, thus allowing the operator to easily move the sash up or down and keep it at a desired height during work.
    Clear sash open height is 500mm-675mm, according to the size and the fume hood.
    Work Surface The easy to clean, chemically resistant, and splash and spillage proof work surface is made of jet-black granite and is fitted with a small oval shaped 100×200mm PP cup-sink for drainage & a good quality water tap. A gas cock is also fitted.
    Other options for the worktop are also available. These include:
  • Epoxy worktop or
  • Stainless steel (316 grade) worktop.
    • Chemical Storage Cabinet At the bottom of the fume hood we provide a ventilated cabinet to store chemicals.
    Blower High speed centrifugal blower. Our high efficiency, silent, energy-saving blower consists of a continuous rating motor and a chemical-resistant impeller. It is designed to give a face velocity of 80-120 FPM (feet/minute) as per ANSI/AIHA Z9.5, at the safe working height.
    Lighting The chamber is fitted with an efficient fluorescent/LED light assembly, with less power consumption.
    Service Fittings A total of 3 service fittings (1 for water and 2 for gases) are provided for; via remotely operated and color coded service valves with SS (stainless steel) wire braided flexible hose and brass fittings.
    Electrical Fittings  4 electrical 15/5 Ampere electrical sockets with switches (Brand-North West/ Havells) are provided for light and blower. LED indicators show the ‘ON’ position of switches. A control panel is provided with starter for blower.
    Fume Hood Air Suction Capacity 650 CFM confirming to the international face velocity norms and as per the fume hood airflow pattern.
    Alarm Our fume hood is equipped with a highly reliable audio / visual alarm device that indicates the approximate face velocity of airflow; with the primary purpose of detecting a drop or rise in airflow (no static pressure) throughout the hood unit. If the fume hood’s exhaust volume falls below a preset exhaust level, the alarm will alert the operator by sound and visual sign.
    Power Supply Supplied with cord and plug to work at 220 volts 1/3 phase 50Hz A.C.

    Model No. Working Area Size
    RSFM-60A-17 90 x 60 x 60 cm
    RSFM-60A-18 120 x 60 x 60 cm
    RSFM-60A-19 120 x 75 x 75 cm
    RSFM-60A-20 150 x 75 x 75 cm
    Back